10 Simple Steps for Cleaner Draught Beer Lines

Beverage lines and draught beer equipment must be routinely cleaned to maintain the quality of draught beer. Failure to do so results in lost sales for failure to satisfy the customer due to bad tasting beer. Below are the recommended steps for thoroughly cleaning draught beer lines: 
 
1. Drain all beer from lines
2. Rinse beer line using clean water
3. Re-circulate an alkaline cleaner solution for the period of time recommended by the chemical manufacturer.
4. Let cleaner soak in beer lines for the period of time recommended by the chemical manufacturer
5. Hand clean beer faucets every time beer lines are cleaned
6. Hand clean beer taps at least every 60 days
7. Rinse beer lines with clean rinse water
8. Test the rinse water at the beer faucet for pH of 6.5-7.5 using pH paper or pH meter
9. Fill and pack line with beer
10. Pour beer, check to make sure the beer is good with no off-aroma, no off-flavor, no excessive foam and no cleaning solution contamination.